pctechguide.com

  • Home
  • Guides
  • Tutorials
  • Articles
  • Reviews
  • Glossary
  • Contact

Hard Disk (hard drive) Operation

The disc platters are mounted on a single spindle that spins at a typical 10,000rpm. On EIDE and SCSI drives the disk controller is part of the drive itself. It controls the drive’s servo-motors and translates the fluctuating voltages from the head into digital data for the CPU.

Data is recorded onto the magnetic surface of a platter in exactly the same way as it is on floppies or digital tapes. Essentially, the surface is treated as an array of dot positions, with each domain’ of magnetic polarisation being set to a binary 1 or 0. The position of each array element is not identifiable in an absolute sense, and so a scheme of guidance marks helps the read/write head find positions on the disk. The need for these guidance markings explains why disks must be formatted before they can be used.

HDD

When it comes to accessing data already stored, the disk spins round very fast so that any part of its circumference can be quickly identified. The drive translates a read request from the computer into reality. There was a time when the cylinder/head/sector location that the computer worked out really was the data’s location, but today’s drives are more complicated than the BIOS can handle, and they translate BIOS requests by using their own mapping.

Interleave Factor

In the past it was also the case that a disk’s controller did not have sufficient processing capacity to be able to read physically adjacent sectors quickly enough, thus requiring that the platter complete another full revolution before the next logical sector could be read. To combat this problem, older drives would stagger the way in which sectors were physically arranged, so as to reduce this waiting time. With an interleave factor of 3, for instance, two sectors would be skipped after each sector read. An interleave factor was expressed as a ratio, N:1, where N represented the distance between one logical sector and the next. The speed of a modern hard disk drive with an integrated controller and its own data buffer renders the technique obsolete.

The rate at which hard disk capacities have increased over the years has given rise to a situation in which allocating and tracking individual data sectors on even a typical drive would require a huge amount of overhead, causing file handling efficiency to plummet. Therefore, to improve performance, data sectors have for some time been allocated in groups called clusters. The number of sectors in a cluster depends on the cluster size, which in turn depends on the partition size.

Reading Data

When the computer wants to read data, the operating system works out where the data is on the disk. To do this it first reads the FAT (File Allocation Table) at the beginning of the partition. This tells the operating system in which sector on which track to find the data. With this information, the head can then read the requested data. The disk controller controls the drive’s servo-motors and translates the fluctuating voltages from the head into digital data for the CPU.

More often than not, the next set of data to be read is sequentially located on the disk. For this reason, hard drives contain between 256KB and 8MB of cache buffer in which to store all the information in a sector or cylinder in case it’s needed. This is very effective in speeding up both throughput and access times. A hard drive also requires servo information, which provides a continuous update on the location of the heads. This can be stored on a separate platter, or it can be intermingled with the actual data on all the platters. A separate servo platter is more expensive, but it speeds up access times, since the data heads won’t need to waste any time sending servo information.

However, the servo and data platters can get out of alignment due to changes in temperature. To prevent this, the drive constantly rechecks itself in a process called thermal recalibration. During multimedia playback this can cause sudden pauses in data transfer, resulting in stuttered audio and dropped video frames. Where the servo information is stored on the data platters, thermal recalibration isn’t required. For this reason the majority of drives embed the servo information with the data.

  • Hard disk (hard drive) construction
  • Hard Disk (hard drive) Operation
  • Hard disk (hard drive) format – the tracks and sectors of the hard disk
  • File systems (FAT, FAT8, FAT16, FAT32 and NTFS) explained
  • Hard Disk (Hard Drive) Performance – transfer rates, latency and seek times
  • Hard Disk AV Capability
  • Hard Disk Capacity
  • Hard Disk Capacity Barriers
  • Hard Disk MR Technology
  • Hard Disk GMR Technology
  • Hard Disk Pixie Dust
  • Hard Disk Longitudinal Recording
  • Hard Disk Perpendicular Recording
  • RAID – Redundant Arrays of Inexpensive Disks
  • Hard Disk SMART Drives
  • Hard Disk MicroDrives
  • Hard Disk OAW Technology
  • Hard Disk PLEDM
  • Hard Disk Millipede
  • Guide to Western Digital’s GreenPower hard drive technology
  • Solid state hard drive (SSD) technology guide

Filed Under: Hard Disks Tagged With: hard disk operation, hard drive operation

Latest Articles

WiFi Access

In the early 2000s, the momentum gained by IEEE 802.11b in the wake of the surge in home networking so as to allow the sharing of broadband Internet connections saw the technology migrate from the home to outdoors. The WLAN configuration was the same - an Access Point (AP) transceiver connected to a … [Read More...]

i845 Chipset

The fact that system builders were obliged to use expensive DRDRAM - by virtue of the absence of any Pentium 4 chipsets supporting conventional SDRAM - had been an issue ever since the Pentium 4's launch at the end of 2000. The situation changed … [Read More...]

Show Days Until Christmas When Clicking Web Button with Python and JS

Are you looking to create a web application that will tell your visitors how many days until Christmas when they click a button? There are several languages that you can use to do this. One of the easiest languages is JavaScript, but you can also try doing this in Python. This article has programs … [Read More...]

Comments

  1. Anonymous says

    October 9, 2011 at 11:38 am

    thanks a lot for sharing this…
    that’s very important for me

    • Sudharshan Reddy Ch says

      July 16, 2012 at 8:37 am

      really it is worth reading,thank u very much

  2. Anonymous says

    November 4, 2011 at 9:17 am

    Man, thanks for your sharing! I learn a lot from you.

  3. joebw says

    January 21, 2015 at 10:11 am

    ho

  4. CHRIS MAITHYA says

    July 3, 2015 at 7:33 am

    please list some of the common input output buses that could be used in disk drives

    • PC Tech says

      July 9, 2015 at 10:08 pm

      I can’t off the top of my head. I think we have an article on the site covering this already but I don’t have the time at the moment to look for it.

Why Internet Bundles Are the Next Battleground for Gamers

A weak internet connection can turn seamless gaming sessions into frustrating experiences filled with lag, buffering or sudden disconnects. For … [Read More...]

Importance of Inbound Marketing in the Digital Age

A couple of months ago, Zacks reported that Hubspot was starting to make some major changes to its inbound marketing strategy. They talk a lot about … [Read More...]

Damage Control Strategies for Resolving Online PR Crises

Last July, Astrologer faced a major crisis after its CEO went viral at a ColdPlay concert when having an affair. This was just one of the many times a … [Read More...]

AI is Not Killing Computer Jobs Like Doomers Projected

There is no denying the reality that AI technology has played a massive role in disrupting our lives. A growing number of people claim that AI … [Read More...]

Everything You Need to Know About Sourcing Circuit Boards From U.S. Suppliers

In This Article This article includes: Why Source PCBs From the United States?How to Get a Quote From a U.S.-Based PCB ManufacturerThe Top U.S. … [Read More...]

Top Taplio Alternatives in 2025 : Why MagicPost Leads for LinkedIn Posting ?

LinkedIn has become a strong platform for professionals, creators, and businesses to establish authority, grow networks, and elicit engagement. Simple … [Read More...]

Guides

  • Computer Communications
  • Mobile Computing
  • PC Components
  • PC Data Storage
  • PC Input-Output
  • PC Multimedia
  • Processors (CPUs)

Recent Posts

How to Prevent a Virus Infection

Anybody who has ever been the victim of a computer virus knows that it affects more than your sanity; in some cases, a virus can ruin your … [Read More...]

2005 Site Updates

Date Details of Updates 14Oct '05 Communications: New sections added on ADSL and ADSL2+, outlining the latest revisions of the ADSL family … [Read More...]

Motherboard USB Ports

Many modern-day motherboards provide a number of USB pin headers that allow connection to USB ports mounted on the front of the system case. A header … [Read More...]

[footer_backtotop]

Copyright © 2026 About | Privacy | Contact Information | Wrtie For Us | Disclaimer | Copyright License | Authors