pctechguide.com

  • Home
  • Guides
  • Tutorials
  • Articles
  • Reviews
  • Glossary
  • Contact

CD-ROM Operations

Apart from far more sophisticated error-checking techniques, the innards of a CD-ROM drive are pretty much the same as those used in CD audio players. Data is stored in the same way on all CDs. The information is stored in sequential 2KB sectors that form a single spiral track that starts at the centre of the disc and wraps around many times until it reaches the outer edge of the disc.

A player reads information from the CD’s spiral track of pits and lands, starting from the centre of the disc and moving to the outer edge. It does this by firing an infrared laser – 780 nano-millimetres wide and generated by a small gallium arsenate semiconductor – through the clear optical grade polycarbonate plastic layer and onto the metallic sheet. Although it’s of very low power, it’s strong enough to damage the eye if shined directly into it. As the disc rotates at between 200 and 500 rpm, the light bounces off the pits and the frequency of the light changes.

CD

The areas around the pits, called lands, also play a part in the process. The reflected light passes through a prism and onto a photosensor, the output of which is proportional to the amount of light it receives. Light reflected from a pit is 180 degrees out of phase with the light from the lands, and the differences in intensity are measured by the photo-electric cells and converted into electrical pulses. The result is that the series of pits and lands of varying lengths stamped into the surface of the disc are interpreted as a series of corresponding 0s and 1s from which the data – or, via a digital-to-analogue converter (DAC), the audio – stored on the disc is recreated. And since just a weak bandwidth laser is the only thing to touch the surface of the CD directly, there’s none of the wear and tear of traditional analogue media to contend with.

Things would be relatively simple if CD-ROM discs were perfectly flat and could be spun with no horizontal deviation. In fact, a considerable amount of extra electronics wizardry is needed to ensure that the laser stays in focus on the disc surface and that it follows the track it’s reading.

There are various methods for maintaining radial tracking, the most common being the three-beam approach. The laser beam isn’t shone directly onto the disc surface but is emitted from a semiconductor laser unit and passed through a diffraction grating to produce two extra light sources, one each side of the main beam. A collimator lens takes the three beams and makes them parallel, after which they’re passed through a prism called a polarised beam splitter. The beam splitter’s job is to allow the outbound beams to pass through while reflecting the returning beams through 90 degrees down to the photodiode that interprets the signal.

The two side beams are measured for intensity, which remains equal as long as they stay on either side of the track. Any sideways movement of the disc will result in an imbalance and a servo motor will reposition the objective lens. Vertical movement is countered by splitting the receptor photodiode into four quadrants and placing it halfway between the horizontal and vertical focal points of the beam. Any deviation of the disc will cause the spot to become elliptical, with a corresponding current imbalance between each opposing pair of quadrants. The objective lens is then moved up or down to ensure the spot remains circular.

CD technology has built-in error correction systems which are able to suppress most of the error that arise from physical particles on the surface of a disc. Every CD-ROM drive and CD player in the world uses Cross Interleaved Reed Solomon Code (CIRC) detection and the CD-ROM standard provides a second level of correction via the Layered Error Correction Code algorithm. With CIRC, an encoder adds two dimensional parity information, to correct errors, and also interleaves the data on the disc to protect from burst errors. It is capable of correcting error bursts up to 3,500 bits (2.4 mm in length) and compensates for error bursts up to 12,000 bits (8.5 mm) such as caused by minor scratches.

  • CD-ROM Red Book
  • CD-ROM Yellow Book
  • CD-ROM XA
  • CD-ROM Green Book
  • CD-ROM Orange Book
  • CD-ROM White Book
  • CD-ROM Blue Book
  • CD-ROM Purple Book
  • CD-ROM CD-I Bridge
  • CD-ROM Photo CD
  • CD-ROM File Systems
  • CD-ROM Manufacturing
  • CD-ROM The Disc
  • CD-ROM Operations
  • CD-ROM Digital Audio
  • CD-ROM CLV
  • CD-ROM CAV
  • CD-ROM Applications
  • CD-ROM Interfaces
  • CD-ROM DMA vs. PIO Mode
  • CD-ROM TrueX Technology

Filed Under: CD-ROM

Latest Articles

EIDE Interfaces

In 1993 Western Digital brought EIDE (Enhanced IDE) onto the market. EIDE is a standard designed to overcome the constraints of ATA while at the same time maintaining backward compatibility. EIDE supports faster data transfer rates - with … [Read More...]

Working with Dim, Public, Private and Static Variables in VBA

VBA is a powerful application that offers a lot of versatility in Microsoft Office applications such as Word and Excel. In this article, we are going to the scope of the variables. The scope refers to where our variables apply once they are defined. It is important to know that the scope of a … [Read More...]

AI Technology is the Fascinating New Frontier of Digital Gaming Industry

The global gaming industry is growing at an unprecedented rate. It generated nearly $138 billion in revenue in 2018. There are a lot of reasons the market is booming. One of the biggest is the rapid progression in AI technology, which makes games better than ever. This past summer, Towards … [Read More...]

Why Internet Bundles Are the Next Battleground for Gamers

A weak internet connection can turn seamless gaming sessions into frustrating experiences filled with lag, buffering or sudden disconnects. For … [Read More...]

Importance of Inbound Marketing in the Digital Age

A couple of months ago, Zacks reported that Hubspot was starting to make some major changes to its inbound marketing strategy. They talk a lot about … [Read More...]

Damage Control Strategies for Resolving Online PR Crises

Last July, Astrologer faced a major crisis after its CEO went viral at a ColdPlay concert when having an affair. This was just one of the many times a … [Read More...]

AI is Not Killing Computer Jobs Like Doomers Projected

There is no denying the reality that AI technology has played a massive role in disrupting our lives. A growing number of people claim that AI … [Read More...]

Everything You Need to Know About Sourcing Circuit Boards From U.S. Suppliers

In This Article This article includes: Why Source PCBs From the United States?How to Get a Quote From a U.S.-Based PCB ManufacturerThe Top U.S. … [Read More...]

Top Taplio Alternatives in 2025 : Why MagicPost Leads for LinkedIn Posting ?

LinkedIn has become a strong platform for professionals, creators, and businesses to establish authority, grow networks, and elicit engagement. Simple … [Read More...]

Guides

  • Computer Communications
  • Mobile Computing
  • PC Components
  • PC Data Storage
  • PC Input-Output
  • PC Multimedia
  • Processors (CPUs)

Recent Posts

Windows Backup Restoration

Click Start, point to All Programs > Accessories > System Tools, and then click Backup. The Backup or Restore Wizard is … [Read More...]

Utilization of New Software for Professional Trading Strategies

We have seen massive growth in the trade management software industry. Grandview Research reports that the market for these software applications is … [Read More...]

Audials Tunebite Software

OVERVIEW: Audials Tunebite is a multi-use Copy, Record and Conversion software program for both audio and video. The Premium version will not convert … [Read More...]

[footer_backtotop]

Copyright © 2026 About | Privacy | Contact Information | Wrtie For Us | Disclaimer | Copyright License | Authors