pctechguide.com

WinXP Driver Installation

Windows XP Setup will have attempted to load drivers for the hardware it recognised. However, there is no guarantee that the default drivers loaded are the latest available, or – if you’re re-building what had previously been an operational system – the same as the versions you were running previously.

The first thing to do is to check the status of all your installed hardware via Device Manager. Access this via Start > Control Panel, double-click System the click the Hardware tab and then Device Manager.

An exclamation mark in a yellow circle is used to indicate devices in a problem state. Right-clicking the entry and selecting Properties will display further information, including an associated error code. Oftentimes the problem will be the absence of an installed driver. In such cases you’ll need to install this, either from the CD-ROM or floppy disk that came with you hardware, or from a file that you subsequently downloaded from the Internet.

Click here to view the Microsoft Knowledge Base Article entitled Explanation of Error Codes Generated by Device Manager. This provides a listing of error codes and associated error messages, together with explanations and possible resolutions.

There are a number of ways to update a driver, one being to select the item in the Device Manager list, right-click and select Properties and then the Driver tab.

Tools

Click Update Driver.

Tools

… and proceed as appropriate.

An alternative method of installation – and one that is perhaps more guaranteed to work successfully – is to simply run the the driver’s Setup.exe program, if this is provided. This will install the drivers and usually prompt you to re-boot the system. Upon re-boot, Windows automatic installation routine will locate the drivers and install the hardware.

Filed Under: How To Do a Clean Installation of WinXP

Latest Articles

Is It Time to Switch to VoIP?

The popularity of VoIP phone systems has risen over the past few years. One barrier to entry is the perceived barrier to entry when leaving a traditional phone system. However, it may not be as complicated as you may think. With that said, you do not want to just jump in without understanding all … [Read More...]

Motherboard CPU

As indicated above - and this is not uncommon - the motherboard upgrade is being accompanied by a switch to a new processor and main memory. In this case the CPU has been used before, and hence the need for the CPU & Heatsink Cleaner. You'll need a lint-free cloth and thermal compound as well … [Read More...]

Guides

Recent Posts

Windows Software Updates

Have you ever noticed those pop-up messages or little icon appearing in the system tray, telling you there is a new software update available and you … [Read More...]